53、praying line.6.Glost firing 烧釉Carefully loading the glazed ware onto a kiln car, the glazed ware is fired at 1280 C. At the temperature, the glaze powder melts and turns into a transparent glass layer covering the biscuit body. The glost-fired ware is inspected and ready for the decoration.7.Lithogr 。

54、aphy 贴花The printed decal is transferred onto the glost ware and dried.8.Decoration firing 二次烧结The decal and the ware are fired at appropriated temperatures and the printed patterns permanently fuse onto the glaze layer to give permanent durable decoration.9.Inspeciton & Packaging 修整 成箱Experienced ey 。

55、es in the inspection area checks for possible faults in the ware and the finished ware is packaged as necessary第二种：Handpainted Dinnerware1.Milling 练泥Various raw materials including feldspar, silica, clay and pottery stone are mixed and fine-milled in the ball mill.2.Filter press & Vacuum extrusion 摞 。

56、泥The clay body is made by filter-pressing the slip. The pressed body de-aired and extruded to the required size through the pug mill.3.Green Making 制坯Using appropriated roller head and plaster mould, green body is formed. For the irregular shapes such as teapots and figurines, slip casting is used.。

57、In casting, liquid clay (slip) is poured into plaster moulds and the green shape forms on the mould as the water is absorbed through the plaster mould.4.Finishing 修坯The rough edges and foot of the green ware are cleaned with wet sponge by automatic edge-cleaning machine or by skilled hand5.Handpaint 。

58、ing 手绘The picture is drawn or painted by hands,then dried.6.Glazing 上釉To seal the surface of the biscuit body and to give the product its glossy finish, glaze is applied using automatic glaze spraying line.7.Glost firing 烧釉Carefully loading the glazed ware onto a kiln car, the glazed ware is fired o 。

59、nce again at 1280 C. At the temperature, the glaze powder melts and turns into a transparent glass layer covering the biscuit body. The glost-fired ware is inspected and ready for the decoration.8.Inspeciton & Packaging 修整 成箱Experienced eyes in the inspection area checks for possible faults in the w 。

60、are and the finished ware is packaged as necessary卫生陶瓷产品部位术语1 ， washable surface：洗净面 ， 卫生设备使用时 ， 水能溅湿的可见面 。
2 ， concealed surface：隐蔽面 ， 卫生设备可见面以外的表面 。
3 ， fender：遮挡 ， 蹲便器前部高出的部位 。
4 ， hollow ring：圈 ，洗面器和便器上部的空心边圈 。
5 ， sewage draining spillway：排污道 ， 便器内污物排出的通道 。
6 ， concealed spillway：隐蔽溢水道 ， 卫生器内与溢水孔相连的溢水暗道 。
7 ， water inlet：进水口 ，。

61、卫生器冲洗水的进入口 。
8 ， drainage exit：排水口 ， 卫生器的废水排出口 。
9 ， water exit：出水口 ， 水箱向配套器件供水的出口 。
10 ， sewage draining exit：排污口 ， 便器的污物排出口 。
11 ， upward socket：承口 ， 存水弯与蹲便器排水口相连的内径扩大的端部 。
12 ， downward socket：插口 ， 存水弯插入配套件承口内的部位 。
13 ， spillway hole：溢水孔 ， 为控制最高水位而设置的与隐蔽溢水道相连的眼孔 。
14 ， spilled water hole：泄水孔 ， 与隐蔽溢水道和排水口相连、泄出溢流水的孔眼 。
15 ， installing hole：安装空 ， 卫生设备上用于固定本身或安装配件的孔眼 。
16 ， jet hole：喷射孔 ， 在坐便器水封下 ， 喷射道的出水孔 。
17 ， round water fender：边缘挡水圈 ， 卫生设备边缘用于挡水溢用的凸圈 。
功能名称术语 (Function)1 ， washin 。

来源：(未知)

【学习资料】网址：/a/2021/0413/0021924641.html

标题：卫浴|卫浴外贸入门基础知识( 六 )